首頁 » 傳感器/模組 成品 套件 Arduino » KITUNOR3
客戶群組 : 一般訪客
無法檢視商品價格.
>> 進階搜尋

防水接頭 E1140B 2P 黑色 (扁)

您目前沒有權限檢示價格   
 
用電子郵件推薦此商品給親友.
電子郵件:
密碼:
[<<第一項] [<上一項] [下一項>] [最後一項>] 總共103 項商品在此目錄

   Arduino Uno R3 開發板
價格: 您目前沒有權限檢示價格   
   
請掃描我





Arduino Uno R3 開發板

 

Overview
The Arduino Uno is a microcontroller board based on the ATmega328 (datasheet). It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz ceramic resonator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.
The Uno differs from all preceding boards in that it does not use the FTDI USB-to-serial driver chip. Instead, it features the Atmega16U2 (Atmega8U2 up to version R2) programmed as a USB-to-serial converter.
Revision 2 of the Uno board has a resistor pulling the 8U2 HWB line to ground, making it easier to put into DFU mode.
Revision 3 of the board has the following new features:
  •  1.0 pinout: added SDA and SCL pins that are near to the AREF pin and two other new pins placed near to the RESET pin, the IOREF that allow the shields to adapt to the voltage provided from the board. In future, shields will be compatible with both the board that uses the AVR, which operates with 5V and with the Arduino Due that operates with 3.3V. The second one is a not connected pin, that is reserved for future purposes.
  • Stronger RESET circuit.
  • Atmega 16U2 replace the 8U2.
"Uno" means one in Italian and is named to mark the upcoming release of Arduino 1.0. The Uno and version 1.0 will be the reference versions of Arduino, moving forward. The Uno is the latest in a series of USB Arduino boards, and the reference model for the Arduino platform; for a comparison with previous versions, see the index of Arduino boards.
Summary
Microcontroller ATmega328
Operating Voltage 5V
Input Voltage (recommended) 7-12V
Input Voltage (limits) 6-20V
Digital I/O Pins 14 (of which 6 provide PWM output)
Analog Input Pins 6
DC Current per I/O Pin 40 mA
DC Current for 3.3V Pin 50 mA
Flash Memory 32 KB (ATmega328) of which 0.5 KB used by bootloader
SRAM 2 KB (ATmega328)
EEPROM 1 KB (ATmega328)
Clock Speed 16 MHz
Schematic & Reference Design
EAGLE files: arduino-uno-Rev3-reference-design.zip (NOTE: works with Eagle 6.0 and newer)
Note: The Arduino reference design can use an Atmega8, 168, or 328, Current models use an ATmega328, but an Atmega8 is shown in the schematic for reference. The pin configuration is identical on all three processors.

 以上僅部分資料 詳細請上官網

資料來源 : http://arduino.cc/en/Main/arduinoBoardUno


3P 線 CNS690 B類 插頭 轉 IEC320 C13 插頭 SVT 14AWG/3C線 長4.5M
CNS690 B類 插頭 轉 IEC320 C13 插頭
您目前沒有權限檢示價格   

PX 大通 HDMI-5MX 高速乙太網 HDMI 線(1.4版)-5米 鍍銀線

您目前沒有權限檢示價格   

傳感器 組合 37件 套裝 Arduino可用
37件 傳感器
您目前沒有權限檢示價格   

Sensor Shield V5.0 傳感器 擴展板 Arduino可用

擴展板


您目前沒有權限檢示價格   

Arduino Duemilanove 開發板

Duemilanove


您目前沒有權限檢示價格   

Proto Shield 原型 擴展板 (含mini麵包板) Arduino可用
擴展板
您目前沒有權限檢示價格   


更多訊息, 請按 這裡

產品上架時間 2013/12/11.


源達科技股份有限公司
 
台北市 中正區 新生南路一段6 號 B1.13.14 室 (台北國際電子廣場) 電話 : 02-2396-6662 #11.14.15  傳真 : 02-2392-5762   E-MAIL:  yd_tech@yahoo.com.tw
Parse Time: 0.362s