首頁 » 傳感器/模組 成品 套件 Arduino » PCBMEGA2560
客戶群組 : 一般訪客
無法檢視商品價格.
>> 進階搜尋

Songwin SMART ATM 名片型晶片讀卡機

您目前沒有權限檢示價格   
 
用電子郵件推薦此商品給親友.
電子郵件:
密碼:
[<<第一項] [<上一項] [下一項>] [最後一項>] 總共103 項商品在此目錄

   Arduino Mega 2560 開發板
價格: 您目前沒有權限檢示價格   
   
請掃描我





Arduino Mega 2560開發板

 

 

Overview
The Arduino Mega 2560 is a microcontroller board based on the ATmega2560 (datasheet). It has 54 digital input/output pins (of which 15 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. The Mega is compatible with most shields designed for the Arduino Duemilanove or Diecimila.
The Mega 2560 is an update to the Arduino Mega, which it replaces.
The Mega2560 differs from all preceding boards in that it does not use the FTDI USB-to-serial driver chip. Instead, it features the ATmega16U2 (ATmega8U2 in the revision 1 and revision 2 boards) programmed as a USB-to-serial converter.
Revision 2 of the Mega2560 board has a resistor pulling the 8U2 HWB line to ground, making it easier to put into DFU mode.
Revision 3 of the board has the following new features:
  •  1.0 pinout: added SDA and SCL pins that are near to the AREF pin and two other new pins placed near to the RESET pin, the IOREF that allow the shields to adapt to the voltage provided from the board. In future, shields will be compatible both with the board that use the AVR, which operate with 5V and with the Arduino Due that operate with 3.3V. The second one is a not connected pin, that is reserved for future purposes.
  • Stronger RESET circuit.
  • Atmega 16U2 replace the 8U2.
Schematic, Reference Design & Pin Mapping
Pin Mapping: PinMap2560 page
Summary
Microcontroller ATmega2560
Operating Voltage 5V
Input Voltage (recommended) 7-12V
Input Voltage (limits) 6-20V
Digital I/O Pins 54 (of which 15 provide PWM output)
Analog Input Pins 16
DC Current per I/O Pin 40 mA
DC Current for 3.3V Pin 50 mA
Flash Memory 256 KB of which 8 KB used by bootloader
SRAM 8 KB
EEPROM 4 KB
Clock Speed 16 MHz

 以上僅部分資料 詳細請上官網

 資料來源 : http://arduino.cc/en/Main/arduinoBoardMega2560


更多訊息, 請按 這裡

產品上架時間 2013/12/13.


源達科技股份有限公司
 
台北市 中正區 新生南路一段6 號 B1.13.14 室 (台北國際電子廣場) 電話 : 02-2396-6662 #11.14.15  傳真 : 02-2392-5762   E-MAIL:  yd_tech@yahoo.com.tw
Parse Time: 0.347s